What to Check When Your Heater is Not Working?

Most people only think about their heating system when it's not working. That's usually when they start to panic and wonder what could be wrong. If your heater is not working, don't worry - we're here to help! In this blog post, we will discuss some of the most common problems with heating systems and how to troubleshoot them. Read on!

 

1) Check the Thermostat

The first thing you should do if your heater is not working is to check the thermostat. Ensure that it is set to "heat" mode and that the temperature is high enough. If the thermostat is set correctly, but the heater still isn't working, there could be a problem with the thermostat itself. Try replacing the batteries or checking for loose wires.

 

You should also consider upgrading to a programmable thermostat. This will allow you to set a schedule for when the heater should be on or off. This can save you money on your energy bill and help extend the life of your heating system. You can also contact your trusted heater repair Avondale, AZ for expert advice.

 

2) Check the Air Filter

Another common problem that can cause your heater to stop working is a dirty air filter. The air filter prevents dust and dirt from entering the heating system. Over time, it can become clogged with debris, which will restrict airflow and cause the system to work harder than necessary. As a result, the system may overheat and shut down.

 

To prevent this from happening, check the air filter every month and replace it as needed. We recommend using a pleated air filter because it has a higher surface area and can capture more particles than other filters. If you have pets or live in an area with a lot of dust, you may need to replace the filter more often.

 

3) Check for Obstructions

Another possible reason your heater is not working is that there is an obstruction in the vents or ductwork. This can happen if the furniture blocks the vents or the ductwork becomes disconnected. Inspect all of the vents and make sure they are clear. Then, check the ductwork to see if it is intact and connected properly.

 

If you find an obstruction, you will need to remove it before the heater starts working again. You may also need to call a professional heater repair Avondale, AZ to address any damage to the ductwork.

 

4) Check for Leaks

Leaks are another common problem that can cause your heater to stop working. The most common type of leak is a gas leak. If you smell gas, it's important to evacuate the area immediately and call your local utility company. Do not try to fix the leak yourself - this is a job for a professional heater repair Avondale, AZ.

 

Another type of leak that can occur is an oil leak. If you notice oil around the base of the heater, there is likely a problem with the seals. This will need to be fixed by a professional as well.

 

In the end, if your heater is not working, don't panic! There are a few things you can check and troubleshoot on your own. However, if the problem persists, it's best to call a professional heater repair Avondale, AZ for assistance.

 

Need Expert Heater Repair Avondale, AZ? Contact Mountainside Air Now!

Our friends at Mountainside Air are the experts when it comes to heater repair Avondale, AZ. With many years of experience, they have seen it all! Give them a call today at 623.745.8363 or visit their website for more information. They would be happy to help you get your heater up and running again in no time!